banner



How To Install Android Wear 2.0

Android Wear 2.0 for Huawei Watch

Android Wear 2.0 on Huawei Watch: Google has released adjacent biggest update Android Wear ii.0. Google has confirmed that update volition be rolled out for the whole range of smart watches. This update includes plenty of new features similar Google Banana,  overhaul design, standalone apps, messaging, support for third-party complications, improvements to watch faces, fitness, and lot more.

"Based on what we've learned from users and developers, we're evolving the platform to improve key experiences on the spotter, including watch faces, messaging, and fitness" said Google.

Huawei Picket was released 2022, September with Android Wear 1.0 comes out of the box. This watch features 400×400 pixel display, 4GB internal storage with 512MB RAM and Snapdragon 400 processors with 300mAh bombardment. In this article, we volition guide how to install Android Wear 2.0 on Huawei Watch.

Android Wear 2.0 on Huawei Watch

Contents

    • Disclaimer
    • Pre-Requisites:
  • Downloads
  • Steps to Install Android Wear two.0 on Huawei Lookout man

Disclaimer

ClickItorNot.com is not responsible for any impairment to your device(south) by post-obit this guide. Go along at your ain risk.

Pre-Requisites:

  • Follow this guide advisedly or else it may lead to brick your device.
  • Maintain at least 50-sixty% of charging to preclude accidental shutdown.

Downloads

Android Clothing 2.0 Preview three for Huawei Lookout –Link Removed

ADB Drivers

Steps to Install Android Wearable 2.0 on Huawei Sentinel

  1. Download and install your device ADB drivers on your PC (Skip this stride if you have already installed ADB Drivers)
  2. Download the firmware epitome (.tgz) on PC
    1. Extract the downloaded .tgz firmware image file. Yous will get a tmp folder or athirty-30-factory-xxx file without any extension.
    2. If you become the tmp folder, then Open the tmp folder and then open the tmpxxxxx_-device-wink-tarball folder. You will come acrossoutput.tar file.
    3. Extract whatsoever 1 of theoutput.tar file or 30-mill-xxx file in adb binder and yous will go the following files:
      • bootloader-xxx-xxx.img
      • wink-all.bat
      • flash-all.sh
      • image-xxx-xxx.nothing
  3. Connect your watch to PC using USB cable.
  4. At present Enable Developer options & ADB debugging on your Watch
    1. Beginning to Settings
    2. Select Most.
    3. Tap 7 times on Build number to enable Programmer options.
    4. Go dorsum to chief settings screen, by swiping left, Scroll down and select Developer options.
    5. Click on ADB debugging, tap on right tick ✓ to confirm enabling ADB debugging.
    6. After performing the above step, when you connect your lookout man to pc, You will go prompt on your Watch screen request to Permit Debugging, select E'er allow from this computer option.
  5. In ADB folder in your PC, open a command window by pressing "Shift + Correct mouse key" and click on "Open command window here."
    • Now Execute the following control in command window
                              adb reboot bootloader                      

      This command volition boot your scout into bootloader way.

  6. Now you should Unlock bootloader on your Wear Lookout. ( ???? By performing this step all the data will be erased on your sentinel)
    1. Execute whatever i of the following commands in the command window.
                              fastboot oem unlock                      

      or

                              fastboot flashing unlock                      
    2. At present long printing the power push of your watch to accept the unlock asking.
      Your watch will once more kick into bootloader mode and yous volition meet "unlocked:yes" line in the bottom of the screen.
  7. Now open the ADB binder where you lot take extracted the firmware image file on your PC.
  8. Now double click on the flash-all.bat file or execute the flash-all.batcommand in the command window.flash-all.shif you are using Linux or mac os.
  9. Afterward successful installation, your device will reboot automatically.

It may take some time for first reboot.

Hope you found this guide helpful. Allow us know your feedback on Android Wear ii.0 on Huawei Spotter in the comment section beneath.

Reader Interactions

Source: https://clickitornot.com/android-wear-2-0-on-huawei-watch/

Posted by: dixoncounto.blogspot.com

0 Response to "How To Install Android Wear 2.0"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel